blanking plate for Opel Vauxhall CDTI Saab TiD Fiat Alfa Lancia1.9 JTD

Material: 4mm aluminum - lifetime warranty

 valve blanking plates with gaskets to removing the whole  system
This kit also contains a stainless steel joining pipe with clamps for joining the coolant hoses on water cooled  valves.
After you've installed a set, must use cheater simulator so it doesn't show EML error.

APPLICATION:
for Opel / Vauxhall with 1.9 CDTI engines:
for Astra H (engines: Z19DTJ 16V 120HP, Z19DTH 16V 150HP)
for Signum (engines: Z19DTH 16V 150HP)
for Vectra C (engines: Z19DTH 16V 150HP)
for Zafira B (engines: Z19DTH 16V 150HP)

for Saab with 1.9 TiD engines:
for 9-3 (engines: Z19DTH 16V 150HP)
for 9-5 (engines: Z19DTH 16V 150HP)

for Fiat with 1.9 JTDM engines:
for Stilo 1.9 JTDM 16V (engines: 103kW/140HP, 93kW/126HP, 110kW/150HP)
for Croma 1.9 JTDM 16V (engines: 110kW/150HP, 2.4 20V 147kW/200HP)

for Alfa Romeo with 1.9, 2.4 JTDM engines:
147 1.9 JTDM 16V (engines: 103kW/140HP, 93kW/126HP, 110kW/150HP, 100kW/136HP)
156 1.9 JTDM 16V (engines: 103kW/140HP, 93kW/126HP, 100kW/136HP)
156 2.4 JTDM 20V (engines: 129kW/175HP, 120kW/163HP)
159 1.9 JTDM 16V (engines: 110kW/150HP)
159 2.4 JTDM 20V (engines: 147kW/200HP)
166 2.4 JTDM 20V (engines: 110kW/150HP, 120kW/163HP, 129kW/175HP)

for Lancia with 2.4 JTDM engines:
Thesis 2.4 JTDM 20V (engines: 120kW/163HP)

Very quick installation.
You need just to loosen screws, put blanking plate with the gasket and then screw them down.

Scope of supply
1 x blanking plate kits

NOTE: Gasket surface if little scratches are normal, if too concerned, please do not buy

Please allow little error due to manual measurement. Thanks for your understanding.
All items are to be fitted by a professional and no instructions are included for this reason.
Professional fitment is mandatory