Note:
The product has just been received, you must first turn on the flashlight to discharge, and then charge the product for more than 4 hours, and then start the car, because the product is empty. This operation can prolong the service life of the product! 1. It is recommended to start the car with three grids or more than 60% of the power supply. 2. Check whether the pile head of the battery is clean. Whether the clamp is stable and does not shake. First clamp the positive and negative poles of the clip to the positive and negative poles of the battery respectively, and wait for 2 to 3 minutes before starting the car. This operation can reduce the load on the power supply

Tips before use
【1】The car cannot be continuously ignited to start the car / or the key is not released, and the next start will be carried out after 30 seconds between each start
【2】The positive and negative poles cannot be reversed. Do not short-circuit the two clips, it will cause an explosion.
【3】Remove the clip within 30 seconds after successfully starting the car. Violation of the above 3 points may cause the [fuse box] of the clip to burn out, please pay attention to the operation method.